I was able to find it’s apk but none of the apks I replaced it with worked. So either the apps I have don’t work in ATL or there is some issue specifically with NewPipe’s flatpak.

Ok, I have NewPipe installed and it’s working but I don’t where it’s apk is located or how to replace it.

Ok, I can try Solus. As long as the only meaningful difference is the package manager, I should be able to use it.

Also, I didn’t find the Manjaro spin but on Budgie’s official website, there is a list of distros that come with Budgie. So, I can try those if, for some reason, can’t use Solus.

I can try that, do you know of any distro that has it preinstalled? I don’t care too much about what it’s based on but I might prefer a distro that’s similar to Linux Mint.

I’m currently using Cinnamon because I thought it would be better than Xfce. While I do think that Cinnamon looks better, there were some minor things that I preferred with Xfce. I want to try Mate and maybe some of the other DEs if I can find a good distro that has them but I may go back to Xfce the next time I install Linux Mint.

The only thing I use as a backup is a Live CD that’s mounted to a USB thumb drive.

I used to use Timeshift but the one time I needed it, it didn’t work for some reason. It also had a problem of making my PC temporarily unusable while it was making a backup, so I didn’t enable it when I had to reinstall Linux Mint.

Something that I considered doing with a similar laptop, was to use it as a low-end portable gaming system. I’d take a lightweight Linux distro, like the 32-bit version of Q4OS if it’s system requirements are lower than your current setup, and get it loaded with a bunch of games with low system requirements and retro emulators. Obviously, it wont be anywhere near as powerful as your main computer (if you have one) but because it’s portable, there could be some value in having a portable gaming pc (unless you have something like the Steam Deck).

Yes but the problem for me was more complicated. Mesa is installed by default in Linux Mint and Vulkan should have worked out of the box but for some reason it defaulted to the wrong Kernel driver for the GPU. I didn’t know this before posting and, as I stated in other replies, every search result on every search engine told me the wrong information.

I don’t know if I need to do that because Vulkan seems to be working now but is that correct? My sources.list file is empty and it states the wrong version of Linux mint. Should I actually edit “/etc/apt/sources.list.d/official-package-repositories.list”, seeing that that has the actual list of repositories?

Yeah it seems like it’s working now.

Ok, it seems to have worked as the game I was using for testing seems to be working fine.

Although, I keep getting the error message (WARNING: radv is not a conformant Vulkan implementation, testing use only.), is that to be expected?

Ok, do I need to restart my computer now?

For some reason, I can’t get Lemmy’s “code” fuction to work properly in this reply but both commands give the same information:

`j@j-HP-Notebook:~$ vulkaninfo --summary WARNING: [Loader Message] Code 0 : terminator_CreateInstance: Failed to CreateInstance in ICD 2. Skipping ICD. ERROR: […/src/amd/vulkan/radv_physical_device.c:1877] Code 0 : Device ‘/dev/dri/renderD128’ is not using the AMDGPU kernel driver: Invalid argument (VK_ERROR_INCOMPATIBLE_DRIVER)

VULKANINFO

Vulkan Instance Version: 1.3.204

Instance Extensions: count = 20

VK_EXT_acquire_drm_display : extension revision 1 VK_EXT_acquire_xlib_display : extension revision 1 VK_EXT_debug_report : extension revision 10 VK_EXT_debug_utils : extension revision 2 VK_EXT_direct_mode_display : extension revision 1 VK_EXT_display_surface_counter : extension revision 1 VK_EXT_swapchain_colorspace : extension revision 4 VK_KHR_device_group_creation : extension revision 1 VK_KHR_display : extension revision 23 VK_KHR_external_fence_capabilities : extension revision 1 VK_KHR_external_memory_capabilities : extension revision 1 VK_KHR_external_semaphore_capabilities : extension revision 1 VK_KHR_get_display_properties2 : extension revision 1 VK_KHR_get_physical_device_properties2 : extension revision 2 VK_KHR_get_surface_capabilities2 : extension revision 1 VK_KHR_surface : extension revision 25 VK_KHR_surface_protected_capabilities : extension revision 1 VK_KHR_wayland_surface : extension revision 6 VK_KHR_xcb_surface : extension revision 6 VK_KHR_xlib_surface : extension revision 6

Instance Layers: count = 7

VK_LAYER_INTEL_nullhw INTEL NULL HW 1.1.73 version 1 VK_LAYER_MESA_device_select Linux device selection layer 1.3.211 version 1 VK_LAYER_MESA_overlay Mesa Overlay layer 1.3.211 version 1 VK_LAYER_VALVE_steam_fossilize_32 Steam Pipeline Caching Layer 1.3.207 version 1 VK_LAYER_VALVE_steam_fossilize_64 Steam Pipeline Caching Layer 1.3.207 version 1 VK_LAYER_VALVE_steam_overlay_32 Steam Overlay Layer 1.3.207 version 1 VK_LAYER_VALVE_steam_overlay_64 Steam Overlay Layer 1.3.207 version 1

Devices:

GPU0: apiVersion = 4206847 (1.3.255) driverVersion = 1 (0x0001) vendorID = 0x10005 deviceID = 0x0000 deviceType = PHYSICAL_DEVICE_TYPE_CPU deviceName = llvmpipe (LLVM 15.0.7, 256 bits) driverID = DRIVER_ID_MESA_LLVMPIPE driverName = llvmpipe driverInfo = Mesa 23.2.1-1ubuntu3.1~22.04.2 (LLVM 15.0.7) conformanceVersion = 1.3.1.1 deviceUUID = 6d657361-3233-2e32-2e31-2d3175627500 driverUUID = 6c6c766d-7069-7065-5555-494400000000 `

Did I do it correctly? GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.cik_support=0 amdgpu.cik_support=1" After saving, is there anything else I have to do it get it to work?

This is what I get when I try to run that set of commands: `j@j-HP-Notebook:~$ sudo apt install mesa-vulkan-drivers mesa-vulkan-drivers:i386 libvulkan1 libvulkan1:i386 vulkan-tools vkd3d-demos mesa-opencl-icd clinfo libxrandr2 libxrandr2:i386 libvulkan-dev libvulkan-dev:i386 libgl1-mesa-dri libgl1-mesa-dri:i386 vkmark glmark2-x11 firmware-amd-graphics radeontop xserver-xorg-video-amdgpu [sudo] password for j:
Reading package lists… Done Building dependency tree… Done Reading state information… Done Package firmware-amd-graphics is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source

E: Unable to locate package vkmark E: Unable to locate package glmark2-x11 E: Package ‘firmware-amd-graphics’ has no installation candidate `

Because Vulkan has never worked out of the box for me in either Ubuntu nor Linux Mint and every single search result on every single search engine states that Ubuntu and it’s derivatives need that PPA for Vulkan to work. I would have tried other solutions if there was even a single mention of another way to get Vulkan working.

My computer has an AMD Radeon R2 Graphics. It seems like both the radeon and the amdgpu modules are installed but the kernel driver in use is radeon. I’d show the output of “vulkaninfo” but it doesn’t seem to show the full thing, is there a way I can get it to show the full output?

The GPU is an AMD Radeon R2 Graphics. It was a bit hard for me to find and I have no idea if it’s accurate but it should support at least Vulkan 1.2.170.

Ok, what is my solution then? Right now, the only thing I know is that when ever I try to run anything in Linux that requires Vulkan, it defaults to Lavapipe instead of using my GPU and if I try to disable Lavapipe, it acts like Vulkan isn’t installed.

I would but I’m actually using Linux Mint because the Xfce edition has low ram usage. My computer’s ram is very slow and it’s only 4GB.