• P03 Locke@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    33
    ·
    1 year ago

    No one ever had doubts how type B or mini B or micro B go in.

    I agree with most of your post, but micro B is a step too far. That fucking plug was always inserted with the following procedure:

    1. Try to plug it in.
    2. Flip the side and try to plug it in again.
    3. Flip it again because you had the right damn side the first time.

    Always, always, always.

      • jarfil@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        edit-2
        1 year ago

        Mini B was rated for something like 10x fewer insertion cycles than micro B, the retaining tabs would give out and the connector would fall off… or worse, twist and break the socket’s inner plastic bit.

          • jarfil@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            In my experience, Mini B was mostly used for data transfer, along with some other port to do the charging. Micro B got introduced as the “all in one” data+charging port. I’ve seen both kinds of ports break, but only the Mini B ones that were also used for charging; the data-only ones, were fine.

            My conclusion is that charging ports use more insertion cycles and are more likely to break, and I keep magnetic charging adapters in all of them (as a side effect, twisting the cable or pulling at an angle just disconnects it, instead of breaking the port).